Mallett 435 Corvette's

[Silver SS]

Nice Ride's:bigok:

http://www.fast-autos.net/mallett/435corvette3.jpg
http://www.fast-autos.net/mallett/435corvette4.jpg


Engine
Type: Supercharged V8
Displacement: 6202 cc
Horsepower: 655 bhp @ 6450 rpm
Torque: 675 lb-ft @ 3950 rpm
Redline: 6500 rpm
Performance
0-60 mph: 3.97 sec
0-100 mph: 8.9 sec
Quarter Mile: 10.7 sec @ 129 mph
Skidpad: 1.41g
Top Speed: 203 mph

Sweet huh
:naughty: :naughty: :naughty:

[Thug Life]

rock :lildevil:

[rayash923]

yea baby yea:naughty:

[Silver SS]

Look at that exhust on the C5:tongue: ...

[ZOSicK]

0-60 mph: 3.97 sec
0-100 mph: 8.9 sec


what more can u ask for ?????????????????????????????? :hail:

[Silver SS]

Originally posted by BlackSS
0-60 mph: 3.97 sec
0-100 mph: 8.9 sec


what more can u ask for ?????????????????????????????? :hail:
I know:naughty:

[MONGOOSE]

WOW!! :hail:

[chevy_sS]

all i can say is wooooooooooooooow :hail:


chevy_sS

[rayash923]

Originally posted by chevy_sS
all i can say is wooooooooooooooow :hail:


chevy_sS my point exactly u read my mind man:tongue:

[Zmas]

Do you have More info. ?

[Diablo]

MALLETT Corvette "HAMMER"


Mallett leaves the "HAMMER" real from the bag and builds on basis of the Corvette C5 a sports car of the superlative in things road performances and technology. The heart is naturally the perfectly again designed engine on the basis of the running engine in the aluminium ms series and of the run Corvette C5R victorious into the 24-Std.-Rennen von Daytona and LeMans.

The Voll-Alu-V-8 engine with a special alloy and 7.0 ltr. Capacity, carries out HAMMER "in the road version of MALLETT over 540 HP and has a torque of over 700 Nm, exclusively by MALLETT in the new model " is built.

The vehicle has besides a special thread chassis with adjustable Penske Renndaempfer and special stabilizers, AP brakes with front 6-Kolben and rear 4-Kolben-Zangen, a special cooling system with a large 4-Reihen aluminum water radiator, a water/oil cooler for engine and a separate transmission oil cooler as well as a special hood with engine compartment exhaust, which besides at high speeds prevents the lift of the front's building.

The "HAMMER" rolls 12x18"on the new forged three-part twin Spoke aluminum rims of MALLETT with the dimensions 10x18" in front and in the back as well as a tyre of 275-30/18 in front and 335-30/18 in the back. Special modifications at the rear axle and the interior fender leave sufficient clearance to this largely dimensioned tyre.


Some road performance values 7.0 of the ltr vehicle:
0-100 km/h 4.1 seconds, 0-200 km/h 14.3 seconds, point approx.. 320 km/h

The first MALLETT "HAMMER" Corvette becomes from the importer, that expects US CAR CONNECTION AG by at the end of of August in Switzerland
_____________________________________




The "new Look" for the C5 Corvette on MALLETT Millenium edition.
http://www.us-carconnection.ch/images/mallett/mallett_headlk3.jpg http://www.us-carconnection.ch/images/mallett/mallett_headlk1.jpg
The new "Non Pop UP" Headlight kit.
Fix dipping the headlights and headlight in a housing under acryl Plexi.
This arrangement is not better only regarding illuminating, it help the vehicle to a still more aggressive appearance and can onto each C5 Corvette be installed.
http://www.us-carconnection.ch/images/mallett/mallett_headlk2.jpg
-----------------------------------------------------


http://www.us-carconnection.ch/images/mallett/mallett1.jpg
Really A Very Special Car for Very Special People!

MALLETT Cars Ltd. in the Ohio/USA created a model with the model "Millenium edition" particularly for Europe.

All MALLETT models are based on the new Corvette C5, which represents an excellent essential structure as well known and in with the utmost care clean workshops by hand, improved using of qualitatively high-standing and partly in racing tested components, to fascinating High Class sports car.

http://www.us-carconnection.ch/images/mallett/mallettyellow1.jpg http://www.us-carconnection.ch/images/mallett/mallettyellow2.jpg

[Diablo]

The "Millenium edition" is based on the technical basic data of the model MALLETT 435 with that

6,1 ltr. Full aluminum V-8, had a set of special components, which raise on the one hand the achievement on over 460 HP with 6000 U/min and the maximum torque to 625 Nm with 5'000 U/min., on the other hand in addition, the limite of the driving as well as brake dynamics into higher levels screws again however again. The various changes see you in the following noted.

http://www.us-carconnection.ch/images/mallett/mallett4.jpg http://www.us-carconnection.ch/images/mallett/mallett5.jpg

Outwardly the model is noticeable particularly by the particularly pulled up carbon/fiber glass hood, which is equipped with an engine compartment exhaust, which blows the engine substantially more artificially respirating and cooling air adds, on the other hand in addition, the positive pressure in the engine compartment reduced to practically zero and thus particularly at higher speeds for a substantially better stability of the vehicle ensures by improved drift.

The new hood lends to the model in addition, a sportier appearance. Likewise more dynamics and sportyness lend the double Seitenfins behind the lateral engine compartment exhaust pits.

Otherwise the basic form of the Corvette in their beauty and in their dimensions was left.
-----------------------------------------------
http://www.us-carconnection.ch/images/mallintes.jpg http://www.us-carconnection.ch/images/mallett_is.jpg
-----------------------------------------------
http://www.us-carconnection.ch/images/mal435.gif
http://www.us-carconnection.ch/images/mallett435s.jpg 6,1 Ltr. Capacity, achievement 435 HP, torque over 600 Nm, 0-160 km/h in 9,2 seconds, Top speed over 300 km/h, transverse acceleration up to 1.0 g

Performance Specifications
HP 500 @ 5800 RPM
Torque 500 @ 4800 RPM
0-60 3.9 Seconds
1/4 Mile 11.55 @ 122 MPH
Top Speed 192+ MPH
Skid Pad 1.01 g

Engine:

Type: All-aluminum Chevrolet LS6 / LS1 (depends on engine veh. orig. equipped with) V8, blueprinted / balanced

Block: Deburred, micro-honed

Bore & Stroke: 3.900"x3.900"

Displacement: 6.1L (372CID)

Compression: 11.5:1

Engine Management: OEM, electronic throttle, OBD II certified

Heads: Aluminum, ported, improved flow, ports flow matched, CC checked

Valvetrain:
Custom billet steel gun-drilled roller cam (precision-degreed), 4340 chromoly pushrods, OEM roller rocker arms, OEM stainless valves (5-angle cut), custom valvesprings (w/ dampers), custom lightweight retainers, roller hydraulic lifters.

Reciprocating Assembly:
Custom billet 4340-Aircraft Quality chromoly crankshaft with nitride treatment and knife-edge aero counterweights, custom billet forged 4340 chromoly H-beam connecting rods, custom forged aluminum Wiseco pistons with ceramic thermal-barrier and anti-friction coatings.

Exhaust: Custom all-stainless twin-outlet, aft of catalyst

Maximum Revolutions: 6500 RPM

Maximum Power: 500 HP @ 5800 RPM / 500 LB-FT @ 4800 (flywheel)
______________________________________
Mallett 435 Chassis Specifications
Suspension
Front: Independent with unequal length control arms, Z51 composite mono-leaf spring (extra if not orig. equipped), Penske/Mallett 8100 series Indy-style double-adjustable shock absorbers with hardcoat aluminum mounting hardware and spherical rod ends. (6-step adj. compression, 23 step adj. rebound). Remote nitrogen reservoirs. Custom Mallett performance front stabilizer bar, custom suspension lowering hardware (1.5").
Rear: Independent with unequal length control arms, Z51 composite mono-leaf spring (extra if not orig. equipped), Penske/Mallett 8100 series Indy-style double-adjustable shock absorbers with hardcoat aluminum mounting hardware and spherical rod ends. (6-step adj. compression, 23 step adj. rebound). Remote nitrogen reservoirs. Custom Mallett performance rear stabilizer bar, custom suspension lowering hardware (1.5").

Brakes
Front: OEM 13.0" x 1.25" vented disk, twin-piston calipers, performance brake pads (street compound)
Rear: OEM 12.0" x 1" vented disk, single-piston calipers, performance brake pads (street compound)

Interior
Seats: OEM Chevrolet Corvette leather seat with "Mallett 435" logo embroidered on head rest
Shifter: Custom Mallett billet aluminum short-throw with solid center bushing and mil-spec hardcoat anodizing (6-speed only)

Wheels and Tires
Front: Mallett-designTwin 5-spoke 3-piece forged aluminum alloy (polished), 18"x9.5" with Michelin Pilot Sport 265x35x18 performance tire
Rear: Mallett-designTtwin 5-spoke 3-piece forged aluminum alloy (polished), 18"x11" with Michelin Pilot Sport 295x35x18 performance tire
___________________________________________

Mallett 435 Standard Features
6.1 Liter (372 CID) 500 HP V8 (LS1 equipped vehicles req. ported LS6 head upgrade -- see "specs")
Body Emblems with "Mallett 435" Logo and Mallett Serial Number
Billet Aluminum Solid-Center Shifter with Mil-Spec Hardcoat (6-speed only)
Stainless Steel High-Performance Twin-Outlet Exhaust System
Penske / Mallett Indy-Style Double Adjustable Shock Absorbers (8100 series)
Mallett Chasis Number Assignment and Vehicle Registry
Mallett Custom Twin 5-Spoke Forged 3-Piece Wheels, 18x9.5, 18x11
Leather Seats with "Mallett 435" Graphics on Headrest
Carbon-Fiber Valve Covers and Radiator Support with 435 Logo on Valve Covers
High Performance Tubular Front / Rear Stabilizer Bars
High Performance Brake Pads
Michelin Pilot Sport Tires 265x35x18, 295x35x18
Vehicle build-records archived at the National Corvette Museum
Mallett 435 standard packages start at $33,000.00

[Diablo]

MALLETT Corvette "HAMMER"
http://www.mallettcars.com/events/images/event_images/2508/2508-1.jpg
Marlan Davis writes: "You can't go wrong with 700 hp and 27.5 mpg on the highway. Screamin' green, dig it! Cobras, Vipers....You've been slimed."

[Diablo]

Mallett 02-003 FOR SALE!
Owned by the Official C5 Registry, this 2002 Corvette Z06 has been outfitted
with the Mallett Hammer package. With only 5900 mi, this vehicle has been
featured in many magazine articles and has been the center of attraction at many
auto shows. A full list of features can be found at the bottom of the page.

The 5.7L LS6 engine has been blueprinted and upgraded with ported heads, performance cam, 1.8 aluminum rockers and has been dyno-tuned.
479hp@6400rpm (406hp at rear wheels)
441lb-ft@4900rpm (374lb-ft at rear wheels)

http://www.mallettcars.com/4-sale/02-003-4-sale/02-003-eng1.jpg http://www.mallettcars.com/4-sale/02-003-4-sale/02-003-beach.jpg
This vehicle has the Corvette Museum Delivery option (R8C)
and has been signed by several of the Corvette engineers


http://www.mallettcars.com/4-sale/02-003-4-sale/02-003-sig2.jpg http://www.mallettcars.com/4-sale/02-003-4-sale/02-003-sig1.jpg

Standard Z06 interior is upgraded with Mallett black billet shifter http://www.mallettcars.com/4-sale/02-003-4-sale/02-003-interior1.jpg http://www.mallettcars.com/4-sale/02-003-4-sale/02-003-interior2.jpg
Mallett 396 custom 1-piece cast wheels with charcoal powercoat are installed with
Michelin Pilot Sport 265/295x18" tires.
Brake rotors have been upgraded with Vette Brakes premium slotted rotors.
The vehicle has been lowered and has Mallett-Penske non-adjustable shocks.
Vette Brakes greasable tie rod ends have also been installed.

http://www.mallettcars.com/4-sale/02-003-4-sale/02-003-side.jpg

- 5.7 Liter (346 CID) 479 HP Sequential Fuel Injection V8
- Custom Dyno Tuning
- 1.8 Aluminum Rocker Arms
- Mallett "D" Port Stainless Steel Long-Tube Headers
- Donaldson High-Flow Air Cleaner
- Penske-Mallett Non-Adjustable Shock Absorbers (veh. lowered 1.25")
- Vette Brakes Performance Slotted Rotors
- Vette Brakes Tie Rod Ends with Grease Fittings
- Mallett Graphics Embroidered on Seat Headrests
- Mallett Serial Number Plaque
- Exclusive Mallett Body Graphics
- Additional Body-Striping and Graphics
- Mallett Custom Billet Shifter
- Custom Ported LS6 Heads, Flow Matched & CC Matched
- Custom Valve Springs (w/ dampers) with Lightweight Retainers
- Mallett Custom 1-Piece Twin 5-Spoke Cast Alloy Wheels with Charcoal Powercoat
- Michelin Pilot Sport 265/295x18" Tires


Offered for sale at $49,500
Contact Mallett Cars for additional information.
sales@mallettcars.com
440-243-8550

[Diablo]

http://www.us-carconnection.ch/images/mal396.gif
5,7 Ltr. Capacity, achievement 396 HP, torque over 530 Nm, 0-160 km/h in 10.6 seconds, Top speed 294 km/h, transverse acceleration up to 0.96 g
http://www.us-carconnection.ch/images/mallett396.jpg
Mallett Corvette options

Hp aluminum water radiator inclusive gearbox oil CHF 1500. -
Transmission oil cooler with pump 2350. -
Shorter rear axle ratio 3900. -
Shorter half axles in the back inclusive. 13"rims with tire 335 5500. -
Carbon fiber brake assembly 14800. -
In SA rolling over cage 8600. -
Ueberrrollbuegel 4-Punkt 3450. -
Running seats without el. Adjustment 4050. -
Chrome-plated steel brake hoses 400. -
Special stabilizer in front 100. -

[Diablo]

http://www.mallettcars.com/Images/album_title1.gif
http://www.mallettcars.com/Images/album/vet_9.jpg
http://www.mallettcars.com/Images/album/vet_10.jpg
http://www.mallettcars.com/Images/album/vet_11.jpg
http://www.mallettcars.com/Images/album/vet_12.jpg
http://www.mallettcars.com/Images/album/vet_16.jpg
-----------------------------------------
http://www.mallettcars.com/Images/album/vet_3.jpg
http://www.mallettcars.com/Images/album/vet_4.jpg
------------------------------------------

[Diablo]

THE RACES

http://www.mallettcars.com/Images/album/races_2.jpg
http://www.mallettcars.com/Images/album/races_3.jpg
http://www.mallettcars.com/Images/album/races_4.jpg
http://www.mallettcars.com/Images/album/races_5.jpg
http://www.mallettcars.com/Images/album/races_6.jpg

[Diablo]

THE TRUCKS

http://www.mallettcars.com/Images/album/truck_1.jpg
http://www.mallettcars.com/Images/album/truck_2.jpg
http://www.mallettcars.com/Images/album/truck_3.jpg
http://www.mallettcars.com/Images/album/truck_4.jpg
http://www.mallettcars.com/Images/album/truck_5.jpg
http://www.mallettcars.com/Images/album/truck_7.jpg
http://www.mallettcars.com/Images/album/truck_8.jpg