Some info plz...

[Camaro_Girl666]

ok guyz how can i change da pc's battery? (that small rounded thingy on da motherboard)


if anyone knowz anything..fill me in plz.



fanx in advance.

[darkfms2000]

Hello,

First of all, you need to unplug the main power of the computer by pulling the wire from the main power supply before you open the computer case. next you need to open the computer case, after that look onto the motherboard and you will see a watch like rounded battery on the board, removing it is easy part just make sure that you dont spoil the port of the battery. installation of the new battery will be like the removal, note that you need to keep the computer without battery for 5 mins before installing the new.

after you finish, switch the computer back on, it should work fine, otherwise you need to run CMOS setup, if you do please let me know.

Thank you,

Faisal

[ZOSicK]

Hello,

First of all, you need to unplug the main power of the computer by pulling the wire from the main power supply before you open the computer case. next you need to open the computer case, after that look onto the motherboard and you will see a watch like rounded battery on the board, removing it is easy part just make sure that you dont spoil the port of the battery. installation of the new battery will be like the removal, note that you need to keep the computer without battery for 5 mins before installing the new.

after you finish, switch the computer back on, it should work fine, otherwise you need to run CMOS setup, if you do please let me know.

Thank you,

Faisal
well said :up2:

[ED]

Hello,

First of all, you need to unplug the main power of the computer by pulling the wire from the main power supply before you open the computer case. next you need to open the computer case, after that look onto the motherboard and you will see a watch like rounded battery on the board, removing it is easy part just make sure that you dont spoil the port of the battery. installation of the new battery will be like the removal, note that you need to keep the computer without battery for 5 mins before installing the new.

after you finish, switch the computer back on, it should work fine, otherwise you need to run CMOS setup, if you do please let me know.

Thank you,

Faisal


mi6arish risala il-dewaan.

Regards,
Sarz Bin Sarz.

[JDM tuner]

regards,
آنه :dot:

[Camaro_Girl666]

mi6arish risala il-dewaan.

Regards,
Sarz Bin Sarz.


^ :smilelol:

[4ced]

make sure u do one thing before you start touching the mother board etc...

just after u open up the PC but beofre you touch any electronic parts, touch something metal like a metal table whatever, to release any static from your body.... otherwise that just might fry some of the very delicate parts inside your pc

:bigok: good luck