Home Made Traction Bars

[SpiderSol]

here is some pic of my Home Made Traction Bar for 93 DelSol and the steps to make one ;)

first buy the parts (2 left thrid and 2 right thrid)
http://i3.photobucket.com/albums/y90/mammad78/c1.jpg

open these
http://i3.photobucket.com/albums/y90/mammad78/c2.jpg

weld the the clamp to it
http://i3.photobucket.com/albums/y90/mammad78/c4.jpg

fix the clamp on other side
http://i3.photobucket.com/albums/y90/mammad78/c3.jpg

fix these and take the measurement between them
http://i3.photobucket.com/albums/y90/mammad78/c52.jpg
http://i3.photobucket.com/albums/y90/mammad78/c5.jpg

go to the work shop with ur measurement and make 2 bars.
and dont forget to jack the arm up befor tighten it
thats it :thumbup:
http://i3.photobucket.com/albums/y90/mammad78/c6.jpg
http://i3.photobucket.com/albums/y90/mammad78/c62.jpg

total cost 35/= BD

[BlueArrow]

Nice write up man :afro:
by the way did u noticed any changes in handling?

[SpiderSol]

Nice write up man :afro:
by the way did u noticed any changes in handling?
thanx......

just finished yesterday didnt had a chance to drive it yet :up:

[...SILVIA...]

Woow..spidersol..the first real technical "how to" thread ever here :D

good job bro... and thanx for a thread like this !



Now write one for me..on how to do my hood in fiber glass :p

[SpiderSol]

Woow..spidersol..the first real technical "how to" thread ever here :D

good job bro... and thanx for a thread like this !



Now write one for me..on how to do my hood in fiber glass :p
thanx bro

i will when i do my front piece for the delsol :up:

[A.Z]

Great work bo yasmeen :D
and thnx for the steps, when are you going to try it 2 see if it handles better or not? this T&T?
I cant wait to read a topic about how did you make the CF hood !
keep it up man

[Thug Life]

u r the man

i think someone will eat his heart alive hahahahahhahaahha

keep up the good work man

and tell us if there is any change

[Kraigoth]

Woow..spidersol..the first real technical "how to" thread ever here :D

good job bro... and thanx for a thread like this !



Now write one for me..on how to do my hood in fiber glass :p

wrong my friend yassry did the first one speaking about dana .

spidersol :afro: , but would it hold the power and what does it do exactly since im not much into the whole drag thing

[SpiderSol]

spidersol :afro: , but would it hold the power and what does it do exactly since im not much into the whole drag thing
As u can see in figure1 the Lower Control Arm is supported from one side only which will allow the wheel to bounce forward and backward under heavy load.

http://i3.photobucket.com/albums/y90/mammad78/Arm.jpg
Figure 1

in figure2 you will see how the traction bar (Red) is holding the LCA from the other side to prevent the wheel from bouncing.

http://i3.photobucket.com/albums/y90/mammad78/Arm1.jpg
Figure 2



if you guys need any info about Import cars specially honda just ask :afro:

[Striker]

amazing thread.. thanx for sharing.. would need it in the future!

[ADM]

Welding isnt that strong and tends to crack. why didnt you droll the U joint n bolt it or use large countersunk rivets?

[SpiderSol]

if its welded by a good welder then no worries :up:

[ADM]

yes, but under shearing loads or torshional loads, welding is known to crack. but since its a crx, im sure they will hold since they dont produce alot of torque. very nice job man.

[SpiderSol]

yes, but under shearing loads or torshional loads, welding is known to crack. but since its a crx, im sure they will hold since they dont produce alot of torque. very nice job man.
thankx bro :up:

[The One]

Woow..spidersol..the first real technical "how to" thread ever here :D

good job bro... and thanx for a thread like this !



Now write one for me..on how to do my hood in fiber glass :p
try driving the car using a remote control............u can reduce the weight of the car with u not in it


is this how slow your machine is u got to reduce the weight to make it go faster



Hint: try taking the doors and fenders off





.

[The One]

spidersol if his works then u can make some money by selling this product

grate job






.

[...SILVIA...]

try driving the car using a remote control............u can reduce the weight of the car with u not in it


is this how slow your machine is u got to reduce the weight to make it go faster



Hint: try taking the doors and fenders off





.



Woow dude..U should join MIT or something ... :drool:

[Thug Life]

Woow dude..U should join MIT or something ... :drool:

dont act like u were in fast and the furious

[The One]

Woow dude..U should join MIT or something ... :drool:
major ego problem................

Truth hearts……………..its OK



.

[...SILVIA...]

Okay if you so...

Lemme listen to 3ai'7tha el manhalee now




.

[JDM tuner]

guys , this thread is helpful , so don't ruin it ! :up:

[SpiderSol]

guys , this thread is helpful , so don't ruin it ! :up:
i hope so

[Ls-1 Master]

good work :ar:

[SpiderSol]

thanx bro :up:

[The One]

guys , this thread is helpful , so don't ruin it ! :up:
this is gulf gt man its normal dont u think if we dont mess it up then there must be something wrong


.