racespec
November 22nd, 2006, 02:18 PM
Hey Guys
DRIVETRAIN MOUNTS & SUSPENSION BUSHES
Nissan S13 - S15 Engine Mounts
Mounts install in place stock rubber engine mounts.
Feature an Aluminum core incased in UHMW. Fully threaded rod extends all the way through the mount so that mount breakage is eliminated.
Mounts produce more vibration than stock, but not as much as solid metal mounts.
They are more stiffer than NISMO and CUSCO items. This added stiffness will make the car more predictable and easier to drive.
This can be used on CA18 and SR20 engines.
http://www.racespec.com.au/catalog/images/S13_engine_mounts.jpg
$153AUS ($119US) set
Mazda FC3S RX7 Engine Mounts
Mounts install in place stock rubber engine mounts.
Feature an Aluminum core incased in UHMW. Fully threaded rod extends all the way through the mount so that mount breakage is eliminated.
Mounts produce more vibration than stock, but not as much as solid metal mounts.
http://www.racespec.com.au/catalog/images/fc3s_engine_mounts.jpg
$117.75AUS ($89.50US) set
Nissan S13 - S15 UHMW Transmission Mount
his mount is made from durable, sound deadening UHMW Polyehtylene.
Being a semi sold mount, it will not cause as much stiffness and vibration as a solid aluminium mount, but will make the car still predictable and easier to drive.
These mounts are stiffer than NISMO and CUSCO items.
http://www.racespec.com.au/catalog/images/S13_semi_trans_mounts.jpg
$103.50AUS ($79US) set
Nissan S13 - S15 SOLID Transmission Mount
This mount is machined from 6061-T6 Aluminum.
Securely mounts manual transmission to crossmember for reduced drivetrain movement. Works well in high horsepower cars which can break stock type mounts.
DOES NOT HAVE PROVISIONS FOR FACTORY EXHAUST HANGER.
DRIVETRAIN NOISE WILL INCREASE GREATLY WHEN USING THIS MOUNT.
http://www.racespec.com.au/catalog/images/S13_trans_mounts.jpg
$103.50AUS ($79US) set
Mazda FC3S RX7 Transmission Mount
Mounts install in place stock rubber transmission mounts.
Feature an Aluminum core incased in UHMW. Fully threaded rod extends all the way through the mount so that mount breakage is eliminated.
Mounts produce more vibration than stock, but not as much as solid metal mounts.
http://www.racespec.com.au/catalog/images/fc3s_trans_mounts.jpg
$74.50AUS ($56.60US) set
Mazda FC3S RX7 DTSS Eliminators
The Mazda FC3S RX7 features a factory rear steer option, which when circuit and drifting, can make the rear of the car prone to stepping out and making it uncontrollable.
DTSS eliminators, basically do what they're called, they remove the rear steer option, making the car more predictable when driving.
They are made from Delrin and feature Stainless Steel centre sleeves.
Perfect for circuit and drift racers.
http://www.racespec.com.au/catalog/images/DTSS_eliminators.jpg
$83.50AUS ($63.50US) set
Mazda FC3S RX7 Rear Differential Mounts
They are machined from BLACK UHMW Polyethylene.
These mounts are much harder than polyurethane or rubber. They replace the rubber mounts on the BACK of the differential.
They will help to reduce differential movement and front mount breakage during acceleration.
Can be installed with common hand tools, no press needed for installation.
They fit all FC Rx-7s. Set includes 2 mounts.
http://www.racespec.com.au/catalog/images/fc3s_rear_subframe_mounts.jpg
$103.50AUS ($79US) set
Nissan S13-S15, R32-R34, Z32 300ZX Subframe Mounts
They are machined from virtually unbreakable DuravarŪ UHMW Polyethylene.
These mounts are much harder than polyurethane or rubber and will never wear out. These mounts will help to reduce subframe movement by securing it in place and reducing wheel hop/axle tramp at the same time.
Great for Autocrossers, Roadracers and Drifters.
Set includes 4 mounts.
You will need to use the standard lower subframe collars/brackets.
http://www.racespec.com.au/catalog/images/S13_rear_subframe_mounts.jpg
$168AUS ($127.70US) set
Thanks
RACESPEC SALES TEAM
sales@racespec.com.au
www.racespec.com.au (http://www.racespec.com.au)
DRIVETRAIN MOUNTS & SUSPENSION BUSHES
Nissan S13 - S15 Engine Mounts
Mounts install in place stock rubber engine mounts.
Feature an Aluminum core incased in UHMW. Fully threaded rod extends all the way through the mount so that mount breakage is eliminated.
Mounts produce more vibration than stock, but not as much as solid metal mounts.
They are more stiffer than NISMO and CUSCO items. This added stiffness will make the car more predictable and easier to drive.
This can be used on CA18 and SR20 engines.
http://www.racespec.com.au/catalog/images/S13_engine_mounts.jpg
$153AUS ($119US) set
Mazda FC3S RX7 Engine Mounts
Mounts install in place stock rubber engine mounts.
Feature an Aluminum core incased in UHMW. Fully threaded rod extends all the way through the mount so that mount breakage is eliminated.
Mounts produce more vibration than stock, but not as much as solid metal mounts.
http://www.racespec.com.au/catalog/images/fc3s_engine_mounts.jpg
$117.75AUS ($89.50US) set
Nissan S13 - S15 UHMW Transmission Mount
his mount is made from durable, sound deadening UHMW Polyehtylene.
Being a semi sold mount, it will not cause as much stiffness and vibration as a solid aluminium mount, but will make the car still predictable and easier to drive.
These mounts are stiffer than NISMO and CUSCO items.
http://www.racespec.com.au/catalog/images/S13_semi_trans_mounts.jpg
$103.50AUS ($79US) set
Nissan S13 - S15 SOLID Transmission Mount
This mount is machined from 6061-T6 Aluminum.
Securely mounts manual transmission to crossmember for reduced drivetrain movement. Works well in high horsepower cars which can break stock type mounts.
DOES NOT HAVE PROVISIONS FOR FACTORY EXHAUST HANGER.
DRIVETRAIN NOISE WILL INCREASE GREATLY WHEN USING THIS MOUNT.
http://www.racespec.com.au/catalog/images/S13_trans_mounts.jpg
$103.50AUS ($79US) set
Mazda FC3S RX7 Transmission Mount
Mounts install in place stock rubber transmission mounts.
Feature an Aluminum core incased in UHMW. Fully threaded rod extends all the way through the mount so that mount breakage is eliminated.
Mounts produce more vibration than stock, but not as much as solid metal mounts.
http://www.racespec.com.au/catalog/images/fc3s_trans_mounts.jpg
$74.50AUS ($56.60US) set
Mazda FC3S RX7 DTSS Eliminators
The Mazda FC3S RX7 features a factory rear steer option, which when circuit and drifting, can make the rear of the car prone to stepping out and making it uncontrollable.
DTSS eliminators, basically do what they're called, they remove the rear steer option, making the car more predictable when driving.
They are made from Delrin and feature Stainless Steel centre sleeves.
Perfect for circuit and drift racers.
http://www.racespec.com.au/catalog/images/DTSS_eliminators.jpg
$83.50AUS ($63.50US) set
Mazda FC3S RX7 Rear Differential Mounts
They are machined from BLACK UHMW Polyethylene.
These mounts are much harder than polyurethane or rubber. They replace the rubber mounts on the BACK of the differential.
They will help to reduce differential movement and front mount breakage during acceleration.
Can be installed with common hand tools, no press needed for installation.
They fit all FC Rx-7s. Set includes 2 mounts.
http://www.racespec.com.au/catalog/images/fc3s_rear_subframe_mounts.jpg
$103.50AUS ($79US) set
Nissan S13-S15, R32-R34, Z32 300ZX Subframe Mounts
They are machined from virtually unbreakable DuravarŪ UHMW Polyethylene.
These mounts are much harder than polyurethane or rubber and will never wear out. These mounts will help to reduce subframe movement by securing it in place and reducing wheel hop/axle tramp at the same time.
Great for Autocrossers, Roadracers and Drifters.
Set includes 4 mounts.
You will need to use the standard lower subframe collars/brackets.
http://www.racespec.com.au/catalog/images/S13_rear_subframe_mounts.jpg
$168AUS ($127.70US) set
Thanks
RACESPEC SALES TEAM
sales@racespec.com.au
www.racespec.com.au (http://www.racespec.com.au)