69 Camaro SilverSS....Serious Pro-Tourer

[69CamaroLS1]

http://www.pro-touring.com/mule/DSCN6844.jpg

http://www.pro-touring.com/mule/DSCN6847.jpg

http://www.popularhotrodding.com/enginemasters/articles/chevrolet/smallblock/02PHR_MulePt702z.jpg

http://www.pro-touring.com/mule/125-2517_IMG.jpg

http://www.pro-touring.com/mule/DSCN6825.jpg

http://www.pro-touring.com/mule/DSCN6828.jpg

http://www.pro-touring.com/mule/DSCN6865.jpg

http://www.pro-touring.com/mule/DSCN6827.jpg


DYNAMOMETER RESULTS
Here's what we were able to produce from a 400ci, EFI, all-aluminum small-block Chevy engine with a complete Stainless Works exhaust system (yes, we ran it with the mufflers and headers that we'll run in the car), 94-octane Sunoco pump gas running about 12.9 to 13.0:1 air/fuel ratio, non-detergent 30W Valvoline oil at 50 psi and 190 degrees F, water at 180 degrees F, and figures corrected to SAE standards:

RPM Torque Hp RPM Torque Hp
3,500 453 302 5,200 519 514
3,600 456 312 5,300 523 527
3,700 460 324 5,400 525 540
3,800 463 335 5,500 526 551
3,900 464 345 5,600 525 560
4,000 465 354 5,700 525 569
4,100 465 363 5,800 519 574
4,200 470 376 5,900 516 580
4,300 476 390 6,000 514 588
4,400 484 406 6,100 510 592
4,500 490 420 6,200 505 597
4,600 498 436 6,300 500 599
4,700 506 453 6,400 495 603
4,800 511 467 6,500 491 608
4,900 513 479 6,600 485 609
5,000 514 489 6,700 477 608
5,100 517 502 6,800 471 610

Its going soon for 1 lap of Amirica.

[Silver SS]

That's power... what a great job :bigok:
Plus the car looks mean:lildevil:

[2Fast]

Great Job :bigok:

[ZOSicK]

wow it looks daaamn fine :bigok:

[Silver SS]

Originally posted by BlackSS
wow it looks daaamn fine :bigok:
I love the back wheels.. nice and wide:naughty:

[yassrey]

THAT WAS STIELOW POSTING A THREAD ABOUT STIELOW:spaz:

[Silver SS]

I can't get enough of that excellent work on that beast:lildevil:

[Diablo]

:scared: :worshippy :hail:

[69CamaroLS1]

The second pic is Mark Stielow he is GM suspension engineer employe, this car was feutured in Hot Rodding for two years step by step buildind this SilverSS to the extreme, this car has a heaven handling & about 14" (335) of rubber for good traction to move the 524hp at the rear wheels, he spent about $85,000 on this project. This is the best camaro ever built. Stepping on the loud pedal unleashes 524hp of 400ci smc throught a T56 to the currie 9-inch, with asphalt clawing Fikes wheels and Michelin tires-OUTRAGEOUS!

[69CamaroLS1]

Originally posted by yassrey
THAT WAS STIELOW POSTING A THREAD ABOUT STIELOW:spaz:

Yassrey you got me man you are the man Budy:bigok:

[Silver SS]

It's a beauty.... it's worth every $$$ spent:bigok:

[chevy_sS]

http://www.pro-touring.com/featured_cars/Camaro/1969_Camaro/Brandi_Criscitiello_69_Camaro/left-front.jpg


with this rims will better:naughty:



thanx


chevy_sS

[69CamaroLS1]

Originally posted by chevy_sS
http://www.pro-touring.com/featured_cars/Camaro/1969_Camaro/Brandi_Criscitiello_69_Camaro/left-front.jpg


with this rims will better:naughty:



thanx


chevy_sS


Those are TT II Amirican racing they are about $1070 , The rims on the car are $3800 & they are designed specially for hi speed they come on Diablos , Porsches and so many european cars for Le mans, those are not ordinary rims they pump air when the car goes flat for about 5 miles:bigok:

[Silver SS]

Originally posted by Stielow
those are not ordinary rims they pump air when the car goes flat for about 5 miles:bigok:
Dayyem:bigok: :spaz:

[ZOSicK]

Originally posted by Silver SS
Dayyem:bigok: :spaz:


u can say that again :bigok:

[Black Z]

Wow:naughty: