My Supercharger Info

[Silver SS]

http://www.capa.com.au/pics/vortech_kits_v2.gif

V-2 SQ Trim Superchargers


The new generation supercharger included in most Vortech street supercharging systems

Helical cut gear profile with SQ technology

Near silent operation

Fits engines up to 680 horsepower

Maximum airflow: 1,000 CFM

Maximum boost pressure: 20 PSI

Maximum impeller speed: 50,000 RPM

Adiabatic efficiency: 79%

Available with straight or curved discharge and clockwise or counter clockwise rotation.

http://www.capa.com.au/pics/vortech_kits_v2_dimensions_new.gif

[Mohnissan]

hi Silver SS

form long time I want to ask you some Q (can I)

1- how many of boost you run in normal or in race
2- have you owen a set of pully to change the boost
3- you try to make pullys size here in bahrain ( they can do it or no)

thanks

hope to see a race for you :bigok:

[MONGOOSE]

:laf:

[Silver SS]

hi Silver SS

form long time I want to ask you some Q (can I)

1- how many of boost you run in normal or in race
2- have you owen a set of pully to change the boost
3- you try to make pullys size here in bahrain ( they can do it or no)

thanks

hope to see a race for you :bigok:

at the moment i'm running at 5.5 to 6 PSI... at low boost and by changeing the pully to a smaller one will give the car a high boost of 11.5 PSI but i need to re map the ECU and have an extra set of injectors and racinf fuel.. ( which i already have at home ) :crazy:

about bahrain making pullies... you better ask the twins ( Salsa383 ) i bet they do it in there workshop :tudevil:

[JDM tuner]

How much is the vortech v2 supercharger. does it fit camaro 3800 series II?

[Silver SS]

You need to check and go to

www.vortechsuperchargers.com

[designo]

make sure when you remap your ECU, you ask them to provide you with what they call a "clam shell" Intergrated Circuit encryption. remapping you ECU through a plug in OBD will not guarantee safety from the dealers ODB reset!

[indy500]

at the moment i'm running at 5.5 to 6 PSI... at low boost and by changeing the pully to a smaller one will give the car a high boost of 11.5 PSI but i need to re map the ECU and have an extra set of injectors and racinf fuel.. ( which i already have at home ) :crazy:

about bahrain making pullies... you better ask the twins ( Salsa383 ) i bet they do it in there workshop :tudevil:


did you do forged or stroker bottom end . if you don't you should do it with 11.5 psi .

[BiGiE]

thats nice silver thanks for sharing it with us

[Silver SS]

wow this is an old thread :crazy: