Blue_k24a4
January 26th, 2012, 08:03 AM
Hi guys
I'm on Project to install TVS2300 on my Lumina SS 6.0 2007 manual
I'm doing contacts with Lingenfelter Performance Engineering
Jeff Myers asked me couple of quastions to make sure the Pontiac g8 "L76" is identical to the Lumina engine "L96"
quato from e-mail communication
================================
From: Jeff Myers <jmyers@lingenfelter.com>
To: A A <***********@yahoo.com>
Sent: Wednesday, January 25, 2012 5:21 PM
Subject: RE: G8/Commodore supercharger
Pictures will only help me guess if the accessory drive is correct or not. Please send me one anyway just so I can see what we are looking at. I have an email out to Magnuson to see if they know if the L96 is compatible with their G8 kit. I know you stated earlier this doesn’t go to the economy mode, but just make sure this is not a displacement on demand engine. If it is, we will need to get you a DOD delete kit, with the proper valley along with the cam, and springs. I would also recommend the hollow stem intake valves, and Inconel exhaust valves for this conversion.
http://www.lingenfelter.com/mm5/merchant.mvc?Screen=PROD&Product_Code=L200265307&Store_Code=LPE&search=dod+delete&offset=&filter_cat=&PowerSearch_Begin_Only=&sort=&range_low=&range_high=
http://www.lingenfelter.com/mm5/merchant.mvc?Screen=PROD&Product_Code=L210150309&Store_Code=LPE&search=gt9&offset=&filter_cat=&PowerSearch_Begin_Only=&sort=&range_low=&range_high=
The comp cams spring kit that I would recommend with this cam is the 26926 kit with titanium retainers. They go for $600.00.
Jeff Myers
Lingenfelter Performance Engineering
1557 Winchester Rd
Decatur, IN 46733
260-724-2552 x 1003
======================================
Do I need DOD delete kit ?
I guess it's only for the L76 since it goes economy while L96 do not have the economy mode...
By the way can someone suggest which garage workshop is best in Bahrain working on Chevrolet cars so I can arrange with installing the kit and Tunning options if available...
I'm on Project to install TVS2300 on my Lumina SS 6.0 2007 manual
I'm doing contacts with Lingenfelter Performance Engineering
Jeff Myers asked me couple of quastions to make sure the Pontiac g8 "L76" is identical to the Lumina engine "L96"
quato from e-mail communication
================================
From: Jeff Myers <jmyers@lingenfelter.com>
To: A A <***********@yahoo.com>
Sent: Wednesday, January 25, 2012 5:21 PM
Subject: RE: G8/Commodore supercharger
Pictures will only help me guess if the accessory drive is correct or not. Please send me one anyway just so I can see what we are looking at. I have an email out to Magnuson to see if they know if the L96 is compatible with their G8 kit. I know you stated earlier this doesn’t go to the economy mode, but just make sure this is not a displacement on demand engine. If it is, we will need to get you a DOD delete kit, with the proper valley along with the cam, and springs. I would also recommend the hollow stem intake valves, and Inconel exhaust valves for this conversion.
http://www.lingenfelter.com/mm5/merchant.mvc?Screen=PROD&Product_Code=L200265307&Store_Code=LPE&search=dod+delete&offset=&filter_cat=&PowerSearch_Begin_Only=&sort=&range_low=&range_high=
http://www.lingenfelter.com/mm5/merchant.mvc?Screen=PROD&Product_Code=L210150309&Store_Code=LPE&search=gt9&offset=&filter_cat=&PowerSearch_Begin_Only=&sort=&range_low=&range_high=
The comp cams spring kit that I would recommend with this cam is the 26926 kit with titanium retainers. They go for $600.00.
Jeff Myers
Lingenfelter Performance Engineering
1557 Winchester Rd
Decatur, IN 46733
260-724-2552 x 1003
======================================
Do I need DOD delete kit ?
I guess it's only for the L76 since it goes economy while L96 do not have the economy mode...
By the way can someone suggest which garage workshop is best in Bahrain working on Chevrolet cars so I can arrange with installing the kit and Tunning options if available...